How to install an aquarium heater
Aquarium heaters play a crucial role in maintaining the water temperature of an aquarium and they are vital if you are holding tropical fishes.
Installing an aquarium heater is a very simple process but it had to be done right and the below step-by-step guide would help a hobbyist to install the aquarium heater in the right way.
Installing an aquarium heater in the right way?
So to get started, you will have to identify the appropriate heater for your aquarium. The word of advice is to pick a heater which you can afford the maximum and I am not saying the expensive the heater it is better but it is wise to pick the one which is trusted by many hobbyists and even the heater is a bit of stretch just go for it and you won’t regret the decision.
Now that we have selected the ideal heater, let’s get into installing the aquarium heater.
Required supplies
- A power port and if need be a power connector.
Required tools
- Scissors
- Cable tie
- Tester
Total cost: USD 60
Duration
Total time: 60 minutes
Step 1 — Unpack
- Unpack the package carefully with scissors without damaging the heater as it is made of glass.
Step 2 — Dust the heater
- Clean the aquarium heater with a piece of dry cloth and wash it gently and this would clean any debris left.
Step 3 — Placement
- Place the aquarium heater in the appropriate position of the aquarium. Ensure that the suction caps hold the aquarium heater firmly. Give it a little push to confirm the hold of the heater.
Step 4 — Temperature Settings
- Depending on the fish you are holding in your aquarium adjust the temperature settings, depending on the type of heater you would find a small knob turn it to set the appropriate temperature.
Step 5 — Power the heater
- Once you have set up the appropriate temperature, switch on the heater by powering the heater. You would notice a RED light glowing and this means the heater is switched on.
Step 6 — Time taken to heat the water
- Depending on the size of your aquarium and heater model it would take 120 to 240 minutes for the water to reach the set temperature.
Result
Well, you have installed the aquarium heater and have it tested if it is working as required by using a thermometer. Give yourself a gentle tap on your shoulder and say Job Well done.
